The terminal is an important component for electrical connection with the wire. Terminal Type
Release time:
2024-07-02 17:33
Source:
It is an electromechanical device with the help of which wires can be terminated. It is usually composed of a metal or an alloy, but carbon or silicon can also be used. Although the wiring harness may vary depending on the system used, connectors and terminals must be used, both of which directly affect the performance and reliability of the wiring harness.
The terminal is an important component for electrical connection with the wire. It is an electromechanical device with the help of which wires can be terminated. It is usually composed of a metal or an alloy, but carbon or silicon can also be used. Although the wiring harness may vary depending on the system used, connectors and terminals must be used, both of which directly affect the performance and reliability of the wiring harness.
With the increasing degree of industrial automation and industrial control requirements more and more stringent, accurate, the demand for terminals gradually increased. With the rapid development of the electronic industry, the use of terminals is more and more extensive and more and more kinds.
Terminal Type
Just like connectors, terminals come in different shapes and sizes. They have connector-like pins through which the current can be regulated. In addition, terminals can be used between the connector pins and sockets in the PCB traces, and a variety of terminals are available.
Ring terminal
The ring terminal has a hollow circular conductive material that allows a screw or stud to pass through it. They may also be referred to as ring-type connectors. In addition, this type of terminal is only compatible with stud size and wire gauge, requiring the use of crimping or welding techniques to connect the ring terminal to the wire.
Fork terminal
Because its shape resembles the letter "Y", it is also called Y-type terminal. This open terminal can be easily installed or removed from the screw. Therefore, it has a unique application in the installation site where there is not enough space. The fork terminal is available in a variety of sizes and insulation levels, and you can choose one according to your needs.
Quick disconnect terminal
Quick disconnect terminals are commonly used in the automotive and consumer goods industries to provide a reliable connection between two wires. Therefore, using this type of terminal, it is possible to connect and disconnect systems with current, is a stable source of connected wires, and there are insulated or non-insulated versions.
Tube type terminal
When the wire connection position is closely adjacent, the tubular terminal can improve the insulation safety and prevent the wire from bifurcation, which can make the wire easier to insert into the end. Due to the requirements of the application, it can be divided into two categories: plastic insulation and bare end.
Splices and Lugs
The connector and lug form a permanent connection when crimped onto the cable. In addition, tin or other metals will be coated on the terminals to prevent corrosion or additional dirt. It is usually used for battery cables, primary wires and different types of electrical connections.
Prev
Related News
Cold pressed terminals include electrical connectors, air connectors.
It is an accessory product used to realize electrical connection, and is divided into the category of connectors in industry.
Terminal block is a kind of accessory product used to realize electrical connection
With the increasing degree of industrial automation and industrial control requirements more and more stringent
When choosing the correct terminal, you need to consider the circuit design and its application.
The plastic insulating material and conductive parts of the terminal are directly related to the quality of the terminal
The terminal is an important component for electrical connection with the wire. Terminal Type
It is an electromechanical device with the help of which wires can be terminated. It is usually composed of a metal or an alloy, but carbon or silicon can also be used. Although the wiring harness may vary depending on the system used, connectors and terminals must be used, both of which directly affect the performance and reliability of the wiring harness.
An accessory product used to make electrical connections that has no parts on a standard PCB and is often referred to as a printed circuit board Printed Wiring Board(PWB).
In order to facilitate the connection of wires, it is actually a piece of metal sheet sealed in insulating plastic. Both ends have holes for inserting wires and screws for fastening or loosening. For example, two wires sometimes need to be connected and sometimes need to be disconnected. At this time, they can be connected with terminals and disconnected at any time without welding or winding them together, which is very convenient and fast.
Service Hotline
Contact
Cao Jun: 13326875782
Email: sales05@shangtong8.com
Li Zengjie: 18028291816
Email: sales08@shangtong8.com
Chen Miao: 13538681033
Email: sales01@shangtong8.com
Zhang Xiujian: 13580859255
Email: sales02@shangtong8.com
Yu Fuping: 13532665722
Email: sales04@shangtong8.com
Han Running: 13537189433
Email: sales03@shangtong8.com
Wang Fan: 18024773968
Email: sales06@shangtong8.com
Phone: 86-769-83020515
Address: No. 1, Lane 1, Xilong Road West, Xicheng, Hengli Town, Dongguan City, Guangdong Province
sweep
